Nancy Codec is mainly the result of research and development by Office Noa in Japan. Currently, the technology is adopted. In addition to Japan ’s J-Phone and NTT DoCoMo, there are major telecom operators in Asia, Europe and the United States including China Mobile Communications Corporation. The stage of testing or research. Traditional video compression requires a high-speed CPU or a dedicated processing chip, which not only takes up space, but also increases power consumption. Relatively speaking, software solutions like Nancy Codec do not need high-speed CPUs or dedicated processing chips, so they can solve the mobile communication market's demand for mobile devices with video processing capabilities.
Nancy Codec is a technology independently developed using the concept of SMSP (Structure Meta Sale Polygon). The principle is to divide the mobile image into models of many different shapes and sizes, and then compress it. Because of the new simple four-calculation algorithm, it is not Motion detection (MoTIon EsTImaTIon) and discrete cosine transform (DCT) are required, so the calculation amount is small and the transmission rate is fast.
Nancy Codec is a compression technology with considerable advantages. Because Nancy Codec uses software to achieve video compression, the hardware processing capacity is only 10% of MPEG4, and the operation speed is twice as fast as MPEG4. The compression rate is ten times of MPEG4. One-half, so the existing mobile communication network can be used to transmit video. At present, many companies have launched DSP chips that support Nancy Codec, including Texas Instruments and Epson. In addition, there are many telecommunications companies behind it, including Japan ’s J-phone and China Mobile. However, although Nancy Codec does have advantages in the development and application, it also has some problems: because Japan Office NOA company exclusively owns this technology, it cannot be technically very open, so it is not conducive to the further development of this technology. On the one hand, it may be difficult to promote the application due to conflicts of interest of all parties.
Convection Heater
The heater on the shell for the outlet, the bottom of the air intake, power after the electric tube around the air is heated to rise from the outlet outflow, and the surrounding cold air from the inlet into the supplement. So repeated cycle, so that the indoor temperature can be improved. When the inlet and outlet are blocked or the ambient temperature is too high, the temperature control element will automatically cut off the electric tube power supply. This heater is used in the power of about 800 watts, but also by increasing the number of electric tube connected to adjust the power. The safety of the heater is high, running quiet, the disadvantage is to slow down the temperature.
Convection Heater
Convection Heater, Natural Convection Heater, Waterproof Convection Heater, Panel Convection Heater
Ningbo APG Machine(appliance)Co.,Ltd , http://www.apgelectrical.com