LED bulb, LED ceiling lamp competition focus

To date, various lighting companies have been working on the LED bulb business, and have been fiercely competing for the E16 and other 'light bulbs' markets used for the E26 and small xenon bulbs used in ordinary light bulbs. Such competition will continue in the future, but each manufacturer will continue to focus on the G13 socket of the fluorescent tube and the ceiling lamp used to install lighting fixtures for the ceiling. The goal is to replace straight fluorescent lamps for office buildings and circular fluorescent lamps for home use. However, LED bulbs can only be won by price and specifications. Straight-tube LED lamps also need to be retrofitted with lighting fixtures. LED ceiling lamps require product planning to increase product appeal to compensate. Higher price. It is estimated that competition between companies will be different from that of LED bulbs.
However, it is estimated that the competition focus of various manufacturers on straight tube type LED lamps and LED ceiling lamps will be different from those of competing LED bulbs. The LED bulb is a consumable replacement business and is used to replace the incandescent bulb installed in the lighting fixture. The sales form is also in the sales model. Moreover, its competitiveness basically depends on the price and brightness of individual products, and manufacturers are more worried. The background of the major lighting manufacturers' power points from LED bulbs to straight tube LED lamps and LED ceiling lamps is that the lineup of LED bulbs of various companies is very rich. In addition, in terms of straight tube type LED lamps, the Japanese bulb industry has set standards, which has prompted large lighting manufacturers to launch more products. Therefore, Matsushita Electric Works, Toshiba Lighting Technology, Hitachi Electric, NEC Lighting, and Mitsubishi Electric Osram have exhibited straight-tube LED lamps supporting the same standard at this year's lighting exhibition.
As a ceiling lamp used for home main lighting, in order to achieve LEDization after the bulb, various manufacturers are accelerating their efforts to expand the product lineup. In addition to the major manufacturers exhibiting existing products at the lighting exhibition, Toshiba Lighting Technology also exhibited new products and development products, and Hitachi Electric also exhibited prototypes of LED ceiling lamps.
The demand for LED bulbs is that the product life cycle cost is lower than that of incandescent bulbs, so the market is expanded, and LED ceiling lamps are burdened by the price of lighting fixtures, and the life cycle cost of products is difficult to reduce. Moreover, it is not easy to promote the low price of LED ceiling lamps. The reason for this is that the life of the light source component LED of the LED ceiling lamp is substantially the same as that of the lighting fixture, and therefore it is not expected that the replacement component market will expand. Among the LED ceiling lamps that have been put into production by various manufacturers, many products are not premised on replacing the light source components.
But straight tube LED lights and LED ceiling lights are not the case. Straight tube type LED lamps are consumables used to replace straight tube type fluorescent lamps, similar to LED bulbs. However, due to different standards, lighting fixtures must be modified, so the sales model of mass merchandisers cannot be used. It is necessary to retrofit existing appliances with the components prepared by the manufacturer and then install the straight tube type LED lamps. Cooperation with construction companies is also very important. In addition, although the product has been standardized, the power supply circuit is installed at the end of the lighting fixture, and thus the performance may be changed due to incompatibility between the power supply circuit and the straight tube type LED lamp. That is to say, considering only the straight tube type LED lamp, the cost and performance of the lighting fixture cannot be determined.
LED ceiling lights are also not simple. This product is similar to LED bulbs in that it can be purchased and easily installed by consumers. However, the LED bulb is only a light source component, and the LED ceiling lamp is a product in which the light source component and the lighting fixture are integrated. Through the planning of commodities, various lighting manufacturers have expanded the LED ceiling lamp market by adding features such as thin, dimming and color-changing functions to ceiling lamps. For large lighting manufacturers, this means losing the market for replacement parts such as circular fluorescent lamps used in traditional ceiling lamps. From this point of view, the ease of lowering the price of LED ceiling lamps will reduce the overall market for ceiling lamps, including ceiling lamps and replacement parts.

Flash Gold+Hard Gold board. the base Material is FR4 IT180A (TG180). 8-layer PCB.Copper thickness is 1oz inner-layer/1.5oz outer-layer.Board Thickness is 1.8mm and the Min.Hole Size is 0.3mm. Min.Line Width/Min.Line Spacing is 0.25mm/0.25mm. green solder-resist & white silkscreen. E-test: 100%. Flash Gold(hard Gold) is an expensive surface treatment, which has the advantage of being able to withstand friction.
Flash Gold(hard Gold)

Flash Gold(hard Gold)

Flash Gold,Custom Flash Gold,Hard Gold,Stick Flash Gold

Orilind Limited Company , http://www.orilind.com