In the first half of the year, Jiangsu's import and export amounted to US$214.6 billion, an increase of 50%

According to Nanjing Customs statistics, in the first half, Jiangsu Province realized foreign trade of $ 214.6 billion, an increase of 49.1% over last year, of which exports 122.48 billion US dollars, an increase of 44.4%; imports US $ 92.12 billion, an increase of 56%.

In terms of national rankings, Jiangsu's imports and exports accounted for 15.8% of the country's total , of which exports accounted for 17.4% and imports accounted for 14.2% . The year-on-year increase in imports and exports was higher than Guangdong, Shanghai, Zhejiang and Shandong by 15.2 , 6.6 , 7.8 and 8.1 percentage points respectively. Export growth was correspondingly higher by 16.9 , 10.9 , 4.7 and 10.4 percentage points.

Since the beginning of this year, Jiangsu's foreign trade has exhibited some new features. First, the processing trade has gradually rebounded, with an import and export volume of US$ 117.96 billion, an increase of 48% , which is faster than the general trade of 4.5 %. Exports of US$ 72.86 billion, an increase of 42.1% , are also higher than average. Trade was 1.1 percentage points. Second, the increase rate of private enterprises was much higher than that of foreign-invested enterprises. Foreign-invested enterprises’ import and export volume was US$ 161.08 billion, up 47.6% year-on-year, and private enterprises’ import and export volume was US$ 31.19 billion, an increase of 62% . Third, exports to the EU improvement of the rapid growth of import and export ASEAN and China Taiwan, the United States, Japan and South Korea export growth is relatively small in the first half, Jiangsu Province, EU imports and exports 39.78 billion US dollars, an increase of 49%, of which exports 31.23 billion US dollars, an increase of 52.8% During the same period, the United States exported 31.41 billion U.S. dollars, an increase of 31.9% , of which exports were 25.57 billion U.S. dollars, an increase of 29.9% . Fourth, the export of electromechanical products and hi-tech products increased strongly. Exports of electromechanical products reached US$ 85.18 billion, an increase of 46.6% ; High-tech products reached US$ 56.59 billion, an increase of 51.3% . Over the same period, apparel, textile yarn fabrics and products, footwear, plastic products, bags, toys, sporting goods, furniture, mattress bedding and lamps The increase in exports of 10 categories of traditional labor-intensive products was US$ 19.31 billion, an increase of 24.7% .

Customs officials said that in the first half of the year, Jiangsu's foreign trade continued to improve, but it could not be blindly optimistic. There are still many uncertainties at home and abroad. Take the newly issued export tax rebate policy as an example. Of the 406 export tax rebates, steel is not colored. Metals and chemical products are the traditional advantages of our province's exports. In the first half of the year, the province’s exports involving the cancellation of export tax rebate products totaled 1.47 billion U.S. dollars, an increase of 1.1 times year-on-year, and accounted for 15.8% of the national export tax rebates for exports during the same period. Guangdong and Shanghai accounted for 6% .

High Frequency PCB
High frequency PCB also called HF PCB.The RF frequency range is typically from 500 MHz to 2 GHz, and designs above 100 MHz are considered RF. The microwave frequency range is anything above 2 GHz. There`s a considerable difference between RF and microwave circuits versus typical digital and analog circuits. In essence, RF signals are very high frequency analog signals. Therefore, unlike digital, at any point in time an RF signal can be at any voltage and current level between minimum and maximum limits. We have much experience in this filed,up to 60 GHz PCB we made.

1.Made of special Resin system material with Low ER and Low loss factor

2.Hybrid Build up mix of FR4 with Low loss material
3.Tight Impedance control
4.Used in Automotive, Radar, CAR to CAR communication, Distance Assistance, Active Drive Systems
We say high frequency ,also like RF PCB and Microwave PCB as they are special material too,not usual FR4 .We have Taconic,Rogers,F4B,F4BM.PTFE material in stock.With this,we can do your special boards quick turn.Unlike other suppliers need long time to purchase material. 

RF PCB

RF PCB,RF Electronic PCB,RF Design PCB,Specialize Flex RF PCB

Storm Circuit Technology Ltd , http://www.stormpcb.com