Huaxia Power 4×300MW Unit Seawater Desulfurization System Improvement Project Anticorrosion Project Tender Notice

1.1 tender conditions

The bidding project of the Huaxia Power 4×300MW unit sea water desulfurization system improvement project has been approved for construction. The bidder is Beijing Longyuan Environmental Protection Engineering Co., Ltd. The construction fund is self-raised, the project has the tendering conditions, and the construction of the project is now underway. Conduct open tendering.

1.3 Project Overview and Bidding Scope

Construction Location: No. 702, Jiangang Road, Haishu, Xiamen

Construction Scale: Xiamen Huaxia International Electric Power Development Co., Ltd. Huaxia Electric Power (hereinafter referred to as Huaxia Electric Power) Phase I and Phase 2 4×300MW machine components were constructed in two phases, one of which was put into operation in 1995 and 1996 respectively. Phase 2 2 ×300MW units were put into operation in 2005 and 2006 respectively. The proposed flue gas desulphurization retrofit project is intended to improve the performance of seawater flue gas desulphurization units for Phase 1 and 2 (Units 1, 2, 3, and 4) of Huaxia Power.

Planned duration: #3 crew from August 10 to November 18, 2016;

Unit #4 September 6th to December 5th 2016;

Unit #2 from January 1 to April 10, 2017;

Unit #1 from May 10 to August 8, 2017

Benchmarking: There is a total tender section for the civil engineering works of No. 1, No. 2, No. 3 and No. 4 units of the tender for water desulfurization, desulfurization and efficiency improvement.

Hydrometeorology: annual average atmospheric temperature of 20.9°C; annual mean relative humidity: 77%; years of hottest month temperature 32.7°C; coldest month temperature of 10.2°C; years of extreme maximum temperature of 38.5°C; years of extreme minimum temperature of 2.0°C; 1183.4mm; years of maximum precipitation of 1772mm; years of average atmospheric pressure of 1007.3mbar; years of average product depth of 0cm; from the ground 10 meters in height, once in 30 years, the average maximum wind speed in 10 minutes 38m / s; historical peak position: 4.63m ( October 22, 1933) Lowest tide of history: -3.17m (February 24, 1921) Average high tide level: 2.47m

Construction geology: Strata from top to bottom can be divided into:

1 Miscellaneous fill: It is composed of residual soil, strong weathered tuff, strong weathered dacite, and mixed rock and small amount of roots. The filling is not laminated and rolled during the construction process and the structure is loose.

2 Silt: Greenish gray, dark gray, grayish black, saturated, fluid plastic, containing shells and humus, smelly, maximum thickness of 18 meters, mainly distributed in the circulating pump room, water intake pipeline, water intake.

3-1 Muddy silty clay: Qing ash, dark gray, grayish black, saturated, flow-molded, containing shells and humus, with a thin layer of fine sand, with a maximum thickness of 13.65 meters. The distribution range is the same as No. 2 soil.

4 fine sand: gray, gray, saturated, loose ~ slightly dense, mixed clay, mainly distributed in the water intake, intake.

5-2 Sandy cohesive soil: residual product, brownish red, grayish green, grayish yellow, slightly wet, plastic-hard plastic, containing gravel, sand, the maximum thickness of 50 meters.

8-2 medium-weathered granite: gray, gray and white, the main mineral composition of quartz, feldspar, biotite, medium grain structure, massive structure, weathering cracks developed, spherical weathering was obvious, showing a fragmentary. General thickness> 1 meter.

8-3 Medium weathered dacite: dark gray, grayish black, main mineral composition quartz, feldspar, hornblende, patchy structure, massive structure, weathered cracks are more developed, showing a mass. General thickness> 1 meter.

9-2 Micro-weathered granite: gray, gray and white, the main mineral composition of quartz, feldspar, biotite, fine grain granite structure, massive structure, weathering cracks are not developed, showing a massive, dense and hard. Thickness> 5 meters.

9-3 The breeze of dacite: dark gray, grayish black, the main mineral composition of quartz, feldspar, hornblende, patchy structure, massive structure, weathering cracks are not developed, was blocky, compact and hard. Thickness> 5 meters.

Transportation:

(1) Waterway

On the south side of the plant area, a phase 3 project has built a 350,000-ton berthing terminal for unloading coal, and the power supply plant will use the coal to unload the ship. Between the unloading dock and the shoreline, a comprehensive gravity dock for 1000-ton ships has also been built. Therefore, during the construction of the second phase, the terminal can be used to transport large and medium-sized pieces of equipment and some materials.

(2) Railways

An international container terminal has been built on the west side of the power plant. From this terminal, a remote railway has been built to the northwest. The railway has been exported from the Yingmei station of the Yingzhou line. Therefore, the railway transportation of the power plant is also very convenient.

(3) Highway

Through Jiankang Road and Xinggang Road, which are built on the northwest and north sides of the plant, it can be connected with the Kok (U.S.)-Yao (Yu-Yun) Highway; it can also pass Maqing Road, Xinyang Bridge, Xingbin Road, etc. with the 319 National Highway and Ha The (gate)-Yu (State) Expressway is easily accessible to Xiamen, Quanzhou, Quzhou and other places.

The scope of the tender: Huaxia Electric 4 × 300 MW unit seawater desulfurization system to improve the absorption tower, flue lining and aeration tank anti-corrosion engineering materials supply and construction.

1.4 Bidder qualification requirements

No.

Section name

Bidder’s financial, qualification and performance requirements

1

Huaxia Electric 4×300MW Seawater Desulfurization System Improves Efficiency Corrosion Protection

1. The bidder must have a statutory qualification for the subject, a registered capital of 10 million yuan and above, and provide relevant documents.

2. The bidder shall have the qualification of professional contractor for anti-corrosion and thermal insulation engineering of level 3 and above or have professional qualification for waterproofing anti-corrosion and thermal insulation engineering contracting at level 2 and above, and provide corresponding qualification certificates.

3. The bidder must provide the safety production license issued by the relevant department.

4. The bidder must have no less than two 300 MW unit or above flue gas desulfurization project performance, the date of signing the contract is January 1, 2012 to date, and provide the corresponding contract scans. (Scans must include project name, scope of work, contract signature stamp page).

5, the project manager must provide a second-level builder certificate.

6. The quality system certification, occupational health and safety management system and environmental management system certification must be provided within the validity period.

7, this tender does not accept the Commonwealth bid.

8. The bidder shall substantially respond to the terms and schedule of the contract as stipulated in the bidding documents.

9. In the past 3 years, the bidder must have not terminated the contract in any contract due to breach of contract or being the reason for the bidder, must not be in the penalty period, and must have no major quality or safety accident similar to the proposed bid. The bidder has not been corrupted or fraudulently defined by China's national authorities, and it has performed bad business reputations in performance (especially in China Guodian Group).

10. The bidder did not have a status listed as a default recipient during the evaluation of the project. The specific determination was made on the basis of the National Court of Default Information and the National Development and Reform Commission. Credit China () website search results prevail.

1.5 Potential bidders wishing to purchase tender documents should first be registered members.

1.6 Selling Bidding Documents:

The tender documents are purchased using the online payment model (wireless transfer, online banking transfer, on-site cash payment and other purchase methods are not accepted). The system also supports corporate online banking payment and personal online banking payment.

1.6.1 If purchased through a company account, company accounts must have online banking capabilities. When online payment is made, this website will be redirected (linked) to the bank website selected by the purchaser.

1.6.2 If purchased through a personal account, it will be considered that the purchaser has obtained authorization from the company and is equivalent to a company purchase. Before you purchase, verify that the online payment limit of your bank card is not less than the selling price of the bidding documents, so as not to affect the purchase of the bidding documents.

1.6.3 The bidder must be the bidder. The basic information such as bidder's name, correspondence address, contact person, and contact information that the potential bidder fills in on the platform must be accurate, and the information on the whole process of tendering and bidding should be issued and contacted.

1.6.4 After successful payment, bidders directly download the electronic version of the bidding documents from the Internet. The tenderer/bidding agency does not provide any paper tender documents. Successful payment means that the tender documents have been sold. Except for the reasons of the tenderer or the bidding agency, the tender documents will not be refunded once sold.

1.6.5 The bidding agency will mail the commercial invoice for the bidding documents to potential bidders as soon as possible according to the mailing address filled in when purchasing the bidding documents.

1.6.6 If the bidding document fails to be purchased or other problems, please contact customer service center.

1.7 Sale of Bidding Documents: From 09:00 on September 30, 2016 - Auction documents will be sold within 16:00 on October 11, 2016.

1.8 Price of Bidding Documents and Bid Security

No.

project name

Quantity

Bidding documents price (yuan)

Duration

Tender number

Bid security (yuan)

1

Huaxia Electric 4×300MW Seawater Desulfurization System Improves Efficiency Corrosion Protection

1200 yuan

See tender notice

GDCX03-SGZB16-0374/01

120000 yuan

1.9 Deadline of Bid Documents: Deadline for electronic bid documents submitted by bidders for bid opening is: 16:00 (Beijing time) on October 25, 2016. Overdue or non-compliant bid documents are not accepted.

1.10 Time and place for the opening of bids: The opening time for the bid is: 16:00 on 25 October 2016.

1.12 The tenderer refuses to accept the tender documents delivered late or not delivered to the designated place.