Taiwan media reported that Elpida President and CEO Yukio Sakamoto said today that after the supply and demand balance is reached in March, the supply of DDR3 memory will begin to tighten in April or May. Today's DRAM inventory for PC OEMs is 0.9 months, and will drop to 0.8 months after mid-March. Sakamoto Hiroshi said that as agents began to replenish inventory, DRAM futures prices are expected to start rising, and 2Gb DDR3 chip prices are likely to rise to $3.
He also believes that with the arrival of a new wave of acquisitions, the wave of mergers and acquisitions, and the possibility of closure of other companies, there may be only three or even two vendors in the DRAM market. DRAM manufacturers must be involved in the production of mobile DRAM chips in order to survive.
With Elpida's purchase of Powerchip's DRAM production capacity, its factory in Hiroshima, Japan is now almost completely turning to mobile DRAM chip production.
In the DRAM market statistics report for the fourth quarter of 2010 announced by the state-of-the-art technology of Jibang, the Elpida share has dropped from the previous 16.1% to 13.6%.
power supply replacement, upgrade or spare power needs. This device includes 6 DC output plug tips that are compatible with the most famous brands: Digital photo frame, security products, modem router, PSP consoles, small fans, digital products, small home appliances, etc...
Specifications:
Efficiency: >80% (TYP)
Input voltage: AC100V-240V
Input current: 1.0A
Output voltage: DC 3V/4.5V/5V/6V/7.5V/9V/12V
Output current: 300mA /600mA/1000mA/ 1500mA /2000mA/
Dimension: 75(L) x 43(W) x 35(H) Unit: mm
Instructions:
1.Connect the tip
There are six tips (=plugs) included and compatible with the most famous brands. Please choose the correct tip before turning on the power and make sure that is firmly attached when you plug it into the DC input of your appliance.
2.Set the DC output voltage
Check your device Power Adapter in order to determine the proper voltage. The correct voltage should be listed on the DC input jack or on your existing power adapter. If not, you can refer to the device manual to obtain the correct voltage setting.
The correct value is the same or the closest in comparison to the original power adapter value. For example, if your device DC input requirement is 5.5V, you can set at 5V or 6V.
3.Power on the adapter
4.Connect to your appliance
Now you are ready to charge or use your device.
Plug: EU/ US/ UK
Built-in OVP OCP OTP and SCP.
Include 5-6 DC tips.
Product pictures:
Ac Power Adapters,Travel Plug Adapters,Universal Travel Adapters,Universal Power Adapter
SHENZHEN CHUXU NEW ENERGY TECH CO., LTD. , http://www.szchuxu.com