Differences in design ideas for LED bulbs in East Asian companies [Disassembly]

As prices have fallen, LED bulbs have become more prevalent. Recently, not only Japanese manufacturers, but also South Korea, China, Taiwan, and European manufacturers have begun to work on the production of LED bulbs. To this end, the nine LED bulbs sold in East Asia were dismantled and analyzed, and it was found that there are huge differences in design ideas between Japanese manufacturers and overseas manufacturers.

LED bulbs are gaining increasing attention as an alternative to incandescent bulbs. It is characterized by low power consumption. However, in addition to being more expensive than incandescent bulbs, many users also believe that there are design problems such as "larger" and "heavier". To this end, the LED bulbs in East Asia, which are currently being sold and from many production sites, have been dismantled and analyzed in order to find inspiration for solving the above problems. Through dismantling, we found differences in design ideas between Japanese manufacturers and overseas manufacturers. This is "Japanese manufacturers pay attention to product design, while overseas manufacturers give priority to cost."

led

(click on the image to enlarge)

The most obvious manifestation of this difference is the base of the LED bulb. LED bulbs from overseas manufacturers are equipped with heat sinks, while those from Japanese manufacturers do not have heat sinks. At first glance, it is thought that products without heat sinks are cheap, but in fact, when there is no heat sink, it is often necessary to use components with high heat resistance, so the cost is not lowered. The use of heat sinks is "in order to improve the design of the product" (Toshiba Lighting Technology). Not just the company, many Japanese domestic manufacturers are working hard to make the shape of the LED bulb close to the incandescent bulb. The LED bulbs of overseas manufacturers "reduced the cost by adopting a nearly extensive design" (assisted dismantling technicians).

Let's take a closer look at the different design ideas embodied in the appearance.

Philizon focus on Greenhouse High Power Led Grow Lights and Full Spectrum LED Grow Lights Manufacturer China,Produce The Best Yields, Run More Efficiently, Use Half The Electricity Of Double Ended HPS.



LED grow lights are the most recent mass produced lamp on the market,although many people have not begun using them yet. Since the tiny LEDs might not be the first thing that you think of when you picture an indoor grow up,that is understandable.In reality,however, they truly are some of the most powerful,effective,and space saving grow lights that you are going to come across throughout your growing career.


 Advantages

 Upgraded Epistar chips,High Lumen,High penetration.
 Zener Diode protection Each LED,one LED Out,other LEDs still work.
 High quality material,Listed Certification Wires,Heatproof Tube,Zero-Risk to catch fire.
 Efficient Full spectrum Special rations of Blue,Red and White for both blooming &fruiting stages.
 Adopting isolated power supply,safe&easy to maintain&long life time.
 Aluminum heat-conducting plate+high quality brand fans,efficient heat dissipation.
 IR LED involved,it is not as bright as other leds,But promote the yield.

 Plug with listed certificate safe to use.


 Full Spectrum High Power Led Grow Light and High PAR for Plants growth.


High power LED Grow light


High power LED Grow light

Product Images





High power LED Grow light

High power LED Grow light


 The Plug you can choose

High power LED Grow light

Ageing  Test

High power led grow light

Application

Our professional High Power Led Grow Light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.  


Package

High power LED Grow light


High power LED Grow light


Quality Control Systems

High power LED Grow light

Warnings:

1.lndoor use only.

2.To avoid being damaged,do not use water or drip irrigation while using.

3.Sunshine lighting time should be 12-18 hours.

4.While irradiating the plants,the height of led grow lamp is not less than 10 inches,low height will cause the destruction of plants.

5.Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hung too high.

6.While taking care of the plants, please spray the leaves and branches 2-3 times everyday,to ensure the the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp.


Trade Terms 

Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)

Sample will be delivered within 7 working days.

Discounts are offered based on order quanlityes.

MOQ:sample order are acceptable

Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.


High Power led grow light

New Design Grow Light,High Power Grow Light,High Power Grow Lamp,Led High Power Grow Light

Shenzhen Phlizon Technology Co.,Ltd. , http://www.philizon.com