A seemingly simple design, in fact, full of the efforts of several engineers and day and night, this design needs to undergo rigorous and repeated evaluation, before it can be launched on the market. TI Designs reference design library, sincerely for you to create a classic! Want to find more reference designs? Landing TI Designs reference design library, you have the design you want!
This article refers to the address: http://
TI Designs Design Library will introduce a series of reference design selections, including industrial, medical, automotive electronics, factory automation and control, building automation, personal electronics and other applications, updated weekly, don't miss it! Now, Let's take a look at the good recommendations in the fifth issue of "Automotive Electronic Reference Design"!
Design overview
The PMP9351 is a compact power and serializer solution for automotive auxiliary camera modules using the OmniVision image sensor OV10635. This reference board has two LMR22007 ($1.0012) synchronous buck regulators that provide two 3.3V outputs and one 1.5V output to power the OV10635 evaluation board that bypasses the onboard LDO. This design occupies an effective PCB board area of ​​20x20mm. The system input voltage is 9V rated voltage from the ECU and its input range is 5.5V to 20V. This reference board includes the DS90UB913Q ($5.2200) serializer and supports a coaxial cable power configuration that allows input power and FPD-Link III signals to be transmitted over a single coaxial cable.
Design system block diagram (click here to download the complete block diagram)
Design features:
· Power and serializer solutions designed for the OmniVision OV10635 image sensor in automotive cameras
· Compact solution size, board area 20x20mm
· 3.3V and 1.5V outputs with output filters to cover I/O, core, analog voltage rails and ensure high image quality
· 5.5V to 20V operating input voltage range, 9V rated input from ECU
· Coaxial cable power supply configuration, transmitting input power and FPD-Link III signals over a coaxial cable
· Connect to the OV10635 EVM with a slightly modified board through a compatible interface
Design documentation (click here to download the full design resource)
Design demonstration:
Fiber Optic Patch Cord LC to FC suited for equipment jumper cable, cross connects, and work area connections. All patch cords are 100% factory tested,FC,SC,ST,LC,MU,MTRJ and hybrid Patch Cords are available in both multimode (62.5/125μm and 50/125μm) and single mode cable-types, in duplex and simplex versions.
LC To FC Fiber Optic Patch Cord
Fiber Jumper,Outdoor Fiber Optic Cable,LC To FC Patch Cord,LC To FC Fiber Patch Cord
Chengdu Xinruixin Optical Communication Technology Co.,Ltd , https://www.xrxoptic.com